Drive section for driven roller conveyors
Item No. CO-003
The diameter of the steel rollers can be customized based on customer specifications.
These conveyors are commonly used in applications where they operate at right angles or facilitate the transfer of items from one conveyor to another.
They run quietly and feature smooth frames without sharp edges, ensuring a safe and seamless operation.
To minimize the risk of injury, the drive axle is securely sealed off.
Specifications:
Tubes Ø 48 mm steel roller.
Axles Ø 8 mm aluminum.
End bearings 6000 2 RS.
Frames Electro-galvanized steel, stainless steel.
Axle pitch 60 or 90 mm.
Width 300, 400, 500, 600 mm.
Length 500, 750, 1000, 1500, 2000, 2500, 3000 mm.
Load 15 kg per roller or max. 75 kg per meter conveyor.
Drive unit 0.10 kW or 0.37 kW.
Gear 20:1 = 10 m/min. or 10:1 = 20 m/min. A frequency control system can be connected directly to the 3-phase motor.
Drive With chain belts from coupled axle to each roller.
Total length Max. 10-12 m depending on the load.